Performance wetsuits


The Molchanovs Performance Wetsuits are made from premium neoprene, for ultimate flexibility and comfort. Designed for competition, they have a smooth SCS layer on the outside for gliding through the water for maximum efficiency.

The 1mm and 1.5mm options come with a lycra interior for easy wearing and are stitched at the seams. The 3mm comes with an open cell interior for warmth, and is glued at the seams.

Available in various stunning colors. Jackets and pants available in different sizes.

All Molchanovs wetsuits are made to order and ship directly from the factory in Russia.


For custom sizing, we will email you measurement instructions after placing your order.

For custom sizing, we will email you measurement instructions after placing your order. Custom sizing must be selected for both top and pants, or neither.

Hoodless is only available for 1mm and 1.5mm

Sleeveless is only available in 1mm and 1.5mm

1.5mm are stitched by default. Stitched and glued means the lycra will be stitched and the neoprene glued. This increases durability and warmth.

SKU: N/A Category:


Made from the highest quality materials

  • Premium neoprene balances warmth and buoyancy
  • Smooth exterior for the ultimate streamlining
  • Lined with lycra for easy slipping on (1mm and 1.5mm options)
  • Lycra also reinforces the neoprene
  • Stitched & glued option for 1.5 mm thickness neoprene

What is Stitched & Glued?

Regular stitching punctures the neopreneĀ as they are sewn together, causing a rough line along the seams where the parts are joined. This is a straightforward and durable production method for most wetsuits.

Stitched & glued wetsuits are produced differently, through a more complex method. The lycra on the insides is stitched together for durability, while the neoprene on the outside is glued together. This results in a smooth exterior all round for maximum streamlining.

Regular stitching punctures the neoprene on the outside, allowing water to leak in easily. By gluing the exterior neoprene, it forms a seal which makes it extremely difficult for water to seep in, thus keeping you warmer for longer. The stitched interior lycra supports the glued seams, making them as durable as regular stitching.

The stitched and glued option is strongly recommended for the 1.5 mm performance wetsuits.


Men’s size chart


Women’s size chart

Wetsuit care

Donning the wetsuit

  1. While donning SCS wetsuits with open cell inside(Molchanovs Performance wetsuits 3 mm),it is necessary to exercise caution and avoid excessive pulling due to limited tear resistance. The entire inside of the wetsuit must be lubricated*prior to putting it on. Once the suit is lubricated, carefully put it on by “stroking” it into place. Avoid grabbing and pulling.It is advisable to have someone assist you in your efforts in both donning and removal. Your assistant must be aware of the delicate nature of the process.
  2. Donning wetsuits with lycra inside (Molchanovs Performance wetsuits 1 and 1.5 mm) is possible in water and on dry body.
  3. Donning SCS wetsuits with fabric finish outside and open cell inside (Molchanovs Training wetsuits 3, 5, and 7 mm) is possible with lubricant or in water as they are more durable and can tolerate more aggressive actions

Notes about lubricant
To prepare, blend thoroughly1/3 hair conditioner with2/3 water. Apply generously to the inside surface of a wetsuit. A completely slippery film should coat the whole wetsuit inside.You may need to adjust the mix proportions to create the slip that works best for your conditions.

Removing the wetsuit

  1. Doffing SCS wetsuits with open cell inside (Molchanovs Performance wetsuits 3 mm) must be done in water.It is very important that when doffing a wetsuit there is enough water in between parts of the wet suit to avoid any friction or tension.It is advisable to have someone assist you in your efforts in both donning and removal. Your assistant must be aware of the delicate nature of the process.
  2. Doffing wetsuits with fabric finish inside/outside may be done on dry land but in water it is easier and more comfortable

General care

  1. A wet suit must be thoroughly rinsed in fresh water right after every dive. If you do not have a chance to do that right after diving, leave your wetsuit in a bag with some seawater. Do not let salt get dry on your wetsuit.Do not machine wash!
  2. Then allow the wetsuit to air dry. Do not dry your wetsuit in the sun, near a fire, on central heating systems or in a drying machine!
  3. In the case of wearing a wetsuit for a long time under the sun, put on a protective nylon t-shirt.
  4. From time to time your wetsuit should be washed using a commercially available “Wetsuit Shampoo”. Follow directions closely. Remove grease, oil and stains using just a commercially available “Wetsuit Degreaser”. Never use petroleum products on your suit.
  5. Store your dry suit in a cool dry place and avoid folds for excessive periods. Short term folding for transport reasons is acceptable. Avoid direct sunlight.6.If you unfortunately tear your wetsuit, for repair use Neoprene Cement commercially available at most Diving centres or Watersport stores. Carefully follow the instructions. Never sew smooth skin seams. Fabric finished surfaces can be loop stitched, but avoid stitching completely through to the opposite surface.

Additional information


1mm, 1.5mm, 3mm

You may also like…